Keep your Canon imagePROGRAF TZ-30000 wide-format printer operating at peak performance with genuine OEM supplies explicitly designed for this 36-inch CAD plotter.
The TZ-30000 delivers exceptional precision for technical drawings, architectural plans, and engineering blueprints, but only when paired with authentic Canon plotter ink cartridges and maintenance components.
Our comprehensive inventory ensures you'll never experience costly downtime during critical projects.
- Genuine Canon Ink: 5-color pigment ink system (MBK, BK, C, M, Y) for vibrant, long-lasting prints
- High Capacity Options: 160ml, 330ml, and 700ml cartridges to match your volume needs
- Smart Inventory Management: Real-time stock levels and expedited shipping from Texas
- Expert Support: Technical assistance from certified Canon wide-format specialists
Canon TZ-30000 Ink Cartridge Comparison
| Ink Type | Part Number | Capacity | Page Yield* | Best For |
|---|---|---|---|---|
| Matte Black (MBK) | PFI-340/740MBK | 330ml/700ml | Up to 2,800 D-size | Technical lines, text |
| Black (BK) | PFI-340/740BK | 330ml/700ml | Up to 2,800 D-size | Photo black, gradients |
| Cyan (C) | PFI-340/740C | 330ml/700ml | Up to 2,800 D-size | Color accuracy |
| Magenta (M) | PFI-340/740M | 330ml/700ml | Up to 2,800 D-size | Color vibrancy |
| Yellow (Y) | PFI-340/740Y | 330ml/700ml | Up to 2,800 D-size | Color completeness |
| Maintenance Cartridge | MC-30 | N/A | 50,000 prints | Waste ink collection |
*Approximate yields based on 5% coverage on D-size (24" x 36") prints for 700ml tanks.
Frequently Asked Questions - Canon TZ-30000 Supplies
What ink cartridges does the Canon TZ-30000 use?
The Canon imagePROGRAF TZ-30000 uses the PFI-340 or PFI-740 series ink cartridges, depending on capacity needs. The system requires five colors: Matte Black (MBK), Black (BK), Cyan (C), Magenta (M), and Yellow (Y). All cartridges use LUCIA TD pigment ink technology for water-resistant, fade-resistant prints.
How long do Canon TZ-30000 ink cartridges last?
Cartridge life depends on print volume and coverage. The 700ml cartridges can yield approximately 2,800-3,200 D-size prints at 5% coverage. For typical CAD drawings with 10-15% coverage, expect 1,000-1,500 prints per 700ml cartridge. The plotter's hot-swap capability allows cartridge replacement during printing without interruption.
Can I use third-party ink in my Canon TZ-30000?
While third-party inks exist, Canon strongly recommends genuine OEM ink cartridges for the TZ-30000. Non-OEM inks may cause print quality issues, clog printheads, void your warranty, and compromise color accuracy critical for technical drawings. The plotter's firmware may also reject non-genuine cartridges.
When should I replace the maintenance cartridge MC-30?
The MC-30 maintenance cartridge should be replaced when the plotter displays a warning message, typically after 50,000 prints or when 80% full. Keep a spare MC-30 on hand as the printer cannot operate without a functioning maintenance cartridge. The cartridge collects waste ink from cleaning cycles and borderless printing.
What's the difference between PFI-340 and PFI-740 cartridges?
The primary difference is capacity: PFI-320 (330ml) for moderate volume, and PFI-720 (700ml) for high-volume production environments. All three use an identical LUCIA TD pigment ink formulation. Larger cartridges offer lower cost-per-ml and fewer interruptions for replacement.
Texas-Based Support & Fast Delivery: As your local Canon wide-format specialist serving Houston, Dallas, Austin, and San Antonio, we maintain extensive TZ-30000 plotter supplies inventory for same-day shipping throughout Texas. Our certified technicians provide expert guidance on ink optimization, maintenance schedules, and troubleshooting. Contact us at 1-866-254-8590 for immediate assistance with your Canon plotter ink cartridges and supplies needs.
